Skip to content

Gear Workshop strategy

Check reach before speed

A small wheel may leave a gap, while a large one can overlap its neighbour. Start by finding a size that actually meshes at each offered shaft position.

Count direction changes

Every external mesh flips the direction. One extra idler can reverse the output even though the endpoint speed ratio stays the same. An open belt preserves direction; a crossed belt flips it.

Read the input and output tooth counts

In a simple train, compare the first and last gears. A large intermediate wheel does not automatically slow the final output. Watch its own slower motion, then compare the output separately.

Follow compound faces

Find the face receiving power. The other face rotates at that same shaft speed, then applies its own tooth ratio to the next wheel. Brass front gears cannot mesh directly with teal rear gears.

Remove a conflicting path

A triangle of external gears cannot turn. A wheel that seems useful can create that loop or overlap another wheel. Removing it may release a train that was already connected correctly.

Match motors before completing branches

For the final machine, compare the two motor directions and their pulley sizes. Once they agree through the belt, complete the two output branches. Undo is free, and a hint searches for a shortest continuation from your actual layout.

Last updated 2026-10-28

Play Gear Workshop now →Gear Workshop rules